@@ -43,62 +43,62 @@ to complete the signup process:</p>
<pre>--
Regards,
The %s Team</pre>';
$string['registeredok']='<p>You have successfully registered. Please check your e-mail account for instructions on how to activate your account</p>';
$string['registeredok']='<p>You have successfully registered. Please check your email account for instructions on how to activate your account.</p>';
$string['registrationnosuchkey']='Sorry, there does not seem to be a registration with this key. Perhaps you waited longer than 24 hours to complete your registration? Otherwise, it might be our fault.';
$string['registrationunsuccessful']='Sorry, your registration attempt was unsuccessful. This is our fault, not yours. Please try again later.';
$string['usernamealreadytaken']='Sorry, this username is already taken';
$string['usernameinvalidform']='Usernames may contain letters, numbers and most common symbols, and must be from 3 to 30 characters in length. Spaces are not allowed.';
$string['usernameinvalidadminform']='Usernames may contain letters, numbers and most common symbols, and must be from 3 to 236 characters in length. Spaces are not allowed.';
$string['youmaynotregisterwithouttandc']='You may not register unless you agree to abide by the <a href="terms.php">Terms and Conditions</a>';
$string['usernamealreadytaken']='Sorry, this username is already taken.';
$string['usernameinvalidform']='Usernames may contain letters, numbers and most common symbols, and must be from 3 to 30 characters in length. Spaces are not allowed.';
$string['usernameinvalidadminform']='Usernames may contain letters, numbers and most common symbols, and must be from 3 to 236 characters in length. Spaces are not allowed.';
$string['youmaynotregisterwithouttandc']='You may not register unless you agree to abide by the <a href="terms.php">Terms and Conditions</a>.';
// core webservices strings start here
$string['control_webservices']='Switch WebServices on or off: ';
$string['manage_protocols']='Enable or Disable protocols that are to be supported by this installation:';
$string['protocolswitches']='Switch protocols on or off';
$string['manage_protocols']='Enable or disable protocols that are to be supported:';
$string['protocol']='Protocol';
$string['rest']='REST';
$string['soap']='SOAP';
$string['xmlrpc']='XML-RPC';
$string['manage_certificates']='These are the Certificates generated as part of <a href="%s">Networking</a> services. These values are used by Mahara when WS-Security Signatures, and Encryption are enabled for a particular wstoken or service user (Only XML-RPC and legacy MNet).';
$string['manage_certificates']='These are the certificates generated as part of <a href="%s">Networking</a> services. These values are used by Mahara when web services security signatures and encryption are enabled for a particular web services token or service user (only XML-RPC and legacy MNet).';
$string['oobinfo']='The following is your verification code that will authorise your external application to have access to the approved data. Please copy and paste the code into the associated application prompt to continue.';
$string['wssigenc']='Enable web services security (XML-RPC Only)';
$string['titlewssigenc']='Web services security';
$string['last_access']='Last access';
$string['verifier']='Verifier token';
$string['oob']='Out-of-band OAuth verification';
$string['oobinfo']='The following is your verification code that will authorise your external application to have access to the approved data. Please copy and paste the code into the associated application prompt to continue.';
$string['instructions']='Instructions';
$string['webservicelogs']='Web Service Logs';
$string['webservicelogs']='Web services logs';
$string['timetaken']='Time taken';
$string['timelogged']='When';
$string['info']='Info';
$string['errors']='Only Errors';
$string['errors']='Only errors';
$string['manageserviceusers']='Manage Service Users';
$string['sudescription']='Allocate users to Service Groups and Institutions. User must only be configured once. All users must have the "webservice" authentication method. The instance of the "webservice" authentication method of the user must be from an institution that they are a member of.';
$string['manageserviceusers']='Manage service users';
$string['sudescription']='Allocate users to service groups and institutions. User must only be configured once. All users must have the "webservice" authentication method. The instance of the "webservice" authentication method of the user must be from an institution that they are a member of.';
$string['serviceuser']='Service owner';
$string['serviceusername']='Service owner "%s"';
$string['invalidserviceuser']='Invalid Service User selected';
$string['invalidserviceuser']='Invalid service user selected';
$string['nouser']='Please select a user';
$string['duplicateuser']='User account is already configured for Web Services';
$string['duplicateuser']='User account is already configured for web services.';
$string['servicefunctionlist']='Functions allocated against the service';
$string['sfldescription']='Build the list of functions that are available to this service';
$string['sfldescription']='Build the list of functions that are available to this service.';
$string['headingusersearchtoken']='WebServices: Token user search';
$string['headingusersearchuser']='WebServices: Service User search';
$string['usersearchinstructions']='Select a user to associate with a webservice by clicking on the avatar. You can search for users by clicking on the initials of their first and last names, or by entering a name in the search box. You can also enter an email address in the search box if you would like to search email addresses.';
$string['headingusersearchtoken']='Web services: Token user search';
$string['headingusersearchuser']='Web services: Service user search';
$string['usersearchinstructions']='Select a user to associate with a webservice by clicking on its avatar. You can search for users by clicking on the initials of their first and last names or by entering a name in the search box. You can also enter an email address in the search box if you would like to search email addresses.';
$string['invalidparameter']='Invalid parameter value detected, execution cannot continue. ';
$string['wsdoc']='Web Service Documentation';
$string['invalidparameter']='Invalid parameter value detected; execution cannot continue. ';
$string['wsdoc']='Web services documentation';
// testclient
$string['testclient']='Web Services test client';
$string['testclient']='Web services test client';
$string['tokenauth']='Token';
$string['userauth']='User';
$string['authtype']='Authentication Type';
$string['authtype']='Authentication type';
$string['sauthtype']='AuthType';
$string['enterparameters']='Enter Function Parameters';
$string['testclientinstructions']='This is the interactive test client facility for Web Services. This enables you to select a function and then execute it live against the current system. Please be aware that ANY function you execute will run for real.';
$string['enterparameters']='Enter function parameters';
$string['testclientinstructions']='This is the interactive test client facility for web services. This enables you to select a function and then execute it live against the current system. Please be aware that ANY function you execute will run for real.';
$string['executed']='Function call executed';
$string['invaliduserpass']='Invalid wsusername/wspassword supplied for "%s"';
$string['oauth_access']='This application will have access to your users details and resources';
$string['oauth_instructions']='If you wish to grant access to this application then "Authorise application access". If you do not want to grant access the press "Cancel".';
$string['oauth_access']='This application will have access to your users\' details and resources';
$string['oauth_instructions']='If you wish to grant access to this application, then click "Authorise application access". If you do not want to grant access, press "Cancel".';
// running webservices messages
$string['accesstofunctionnotallowed']='Access to the function %s() is not allowed. Please check if a service containing the function is enabled. In the service settings: if the service is restricted check that the user is listed. Still in the service settings check for IP restriction or if the service requires a capability.';
$string['accesstofunctionnotallowed']='Access to the function %s() is not allowed. Please check if a service containing the function is enabled. In the service settings: If the service is restricted, check that the user is listed. Still in the service settings check for IP restriction or if the service requires a capability.';
$string['accessexception']='Access control exception';
$string['accessnotallowed']='Access to web service not allowed';
$string['addfunction']='Add function';
...
...
@@ -214,7 +212,7 @@ $string['createuser'] = 'Create a specific user';
$string['default']='Default to "%s"';
$string['deleteservice']='Delete the service: {$a->name} (id: {$a->id})';
$string['doc']='Documentation';
$string['documentation']='web service documentation';
$string['errorinvalidparam']='The param "%s" is invalid.';
$string['errorinvalidparamsapi']='Invalid external api parameter';
$string['errorinvalidparamsdesc']='Invalid external api description';
$string['errorinvalidresponseapi']='Invalid external api response';
$string['errorinvalidresponsedesc']='Invalid external api response description';
$string['errorinvalidparamsdesc']='Invalid external API description';
$string['errorinvalidresponseapi']='Invalid external API response';
$string['errorinvalidresponsedesc']='Invalid external API response description';
$string['errormissingkey']='Missing required key in single structure: %s';
$string['errornotemptydefaultparamarray']='The web service description parameter named \'%s\' is an single or multiple structure. The default can only be empty array. Check web service description.';
$string['errornotemptydefaultparamarray']='The web service description parameter named \'%s\' is a single or multiple structure. The default can only be an empty array. Check web service description.';
$string['erroroptionalparamarray']='The web service description parameter named \'%s\' is an single or multiple structure. It cannot be set as VALUE_OPTIONAL. Check web service description.';
$string['errorresponsemissingkey']='Error in response - Missing following required key in a single structure: %s';
$string['erroroptionalparamarray']='The web service description parameter named \'%s\' is a single or multiple structure. It cannot be set as VALUE_OPTIONAL. Check web service description.';
$string['errorresponsemissingkey']='Error in response: Missing following required key in a single structure: %s';
$string['errorscalartype']='Scalar type expected, array or object received.';
$string['errorunexpectedkey']='Unexpected keys (%s) detected in parameter array.';
$string['execute']='Execute';
...
...
@@ -239,13 +237,13 @@ $string['failedtolog'] = 'Failed to login';
$string['function']='Function';
$string['generalstructure']='General structure';
$string['information']='Information';
$string['invalidaccount']='Invalid web services account - check service user configuration';
$string['invalidextparam']='Invalid external api parameter: %s';
$string['invalidextresponse']='Invalid external api response: %s';
$string['invalidiptoken']='Invalid token - your IP is not supported';
$string['testclientdescription']='* The web service test client <strong>executes</strong> the functions for <strong>REAL</strong>. Do not test functions that you don\'t know. <br/>* All existing web service functions are not yet implemented into the test client. <br/>* In order to check that a user cannot access some functions, you can test some functions that you didn\'t allow.<br/>* To see clearer error messages set the debugging to <strong>{$a->mode}</strong> into {$a->atag}<br/>* Access the {$a->amfatag}.';
$string['testclientdescription']='* The web service test client <strong>executes</strong> the functions for <strong>REAL</strong>. Do not test functions that you don\'t know. <br/>* All existing web service functions are not yet implemented into the test client. <br/>* In order to check that a user cannot access some functions, you can test some functions that you didn\'t allow.<br/>* To see clearer error messages, set the debugging to <strong>{$a->mode}</strong> into {$a->atag}<br/>* Access the {$a->amfatag}.';
$string['testwithtestclient']='Test the service';
$string['tokenauthlog']='Token authentication';
$string['userasclients']='Users as clients with token';
...
...
@@ -301,7 +299,7 @@ $string['accessdeniedforinstgroup'] = ' access denied for institution "%s" on gr
